Welcome

24-hour Hotline0086 13857328005
CONTACT US
Tel:
0086 13857328005
Mail:info@bluston.cn
wechat: 13857328005
QQ: 66043444
Skype: burcezhaoo
Add:No.888 , Tongde Road, Tongxiang City, Zhejiang, China 314500
Current location:Home > en > Our products > Resin System >
Vinylester resin
Date:2018-02-25
MFE 11V is low viscosity version of MFE 11 bisphenol-A epoxy vinyl ester resin designed for Vacuum Infusion Process.  

Benefits & Properties 

•  Lower viscosity version of MFE 11, providing excellent mechanical properties and chemical resistance as MFE 11. 
•  Effectively wet out with glass fiber.
•  Good air drying, surface drying in 45 min.
•  Excellent corrosion resistance, especially to alkali. • Low peak exotherm temperature, low shrinkage   and superior toughness.
•  Suitable for vacuum infusion process.

Applications and Fabrication Techniques

 
•  Suitable for the fabrication of composites products such as boat, container, hull of the yacht, etc.
•  Lloyd's and CCS approved for marine use.
 
 
Typical Liquid Resin Properties
Property(1) Value
Appearance Light yellow
Acid value mg KOH/g 6-14
Viscosity, cPs 25℃ 150-250
Styrene Content 42-48%
Shelf Life(2), Dark, 25℃ 9 months
(1) Typical property values only, not to be construed as specifications (2) Unopened drum with no additives, promoters, accelerators, etc.
added. Shelf life specified from date of manufacture.
 
 
 Typical Properties (1) Resin Clear Casting (3)

    Flexural Modulus / GPa           3.8
Heat Distortion Temperature(4) 105 C ISO 75
Density 1.1323g/m3 ISO 1183
(3) Cure schedule: 24 hours at room temperature; 2 hours at 120C
(4) Maximum stress: 1.8 MPa]


Safety and Handling Consideration

• The product should be packed into clean, dry, safe and sealed container, standard package is Non-Returnable Drum with Net Weight of 200 kg. Per IBC 1000kg.
• The specification is 2015 edition and may change with the technological improvement.
• From May to October, conveyance in refrigeration car or in nighttime, averting from sunshine.
• Commercial warranty:  nine months from the date of manufacture, when stored in accordance with the conditions stated below. Any unsuitable condition of storage and conveyance will cause the shortening of shelf life.


Recommended Storage:

Drums - Store at temperatures below 25℃. Storage life decreases with increasing storage temperature. Avoid exposure to heat sources such as direct sunlight or steam pipes. To avoid contamination of product with water, do not store outdoors. Keep sealed to prevent moisture pick-up and monomer loss. Rotate stock. For more information, please contact us at 

Contact us for detail information

Mail: info@bluston.cn; bruce@bluston.cn
Web: www.bluston.cn 
   bluston.en.made-in-china.com 
Tel: +86 573 8889 5051
Fax: +86 573 8889 5052

Skype: brucezhaoo
Whatsapp: +86 13857328005